A Vax machine is an ideal cleaner for carpets and floors. It is great for taking out dirt, dust, and stains. But as with any machine, those machines require maintenance. If you don’t keep it up, it won’t run right. And it could also break before then.
Routine maintenance keeps your Vax perking right along. It will save you money on repairs. This article will cover that in easy steps. It applies to home users and business users.
It’s not like you need to be carrying anything special with you. You only need time and care. Consider this to be the full Vax machine servicing manual.
Why Regular Maintenance Is Important
Keep your machine in the best shape possible with routine maintenance. A clean machine cleans better. It also uses less power. It makes less noise. Most importantly, it lasts longer. Parts inside the machine may be obstructed by dirt and dust.
This may degrade performance and damage the product. For businesses, the stakes are even higher.
A machine that breaks down can slow your work pace. It can even impact the quality of your service. It just means for home users, a little caring translates to fewer troubles and more cleaning.
Basic Safety Before You Start
Be sure to always shut off the machine before cleaning. Disconnect the power plug. If you only recently used it, let it cool. At NO time should a machine ever be cleaned while it is running. Protect electrical parts from water. By doing this, it keeps you safe and prevents the machine from being damaged.
Verify the Power Cable and Plug
Start with the basics. Look at the power cable. Check for cuts or damage. A frayed cable could be dangerous. It can also cause the machine to stop in its tracks. Check the plug as well. Just be sure it’s clean and secure. If you do notice any damage, don’t use the machine until it has been repaired.
Clean the Water Tanks After Each Use
Most Vax machines are two-tank. One for clean water. One for dirty water. Do not leave the dirty water tank full when completed. Rinse it with clean water. No more dirty water left in. It can also create an odor and bacteria. Make sure to rinse out the clean water tank as well, occasionally. This rids built-up soap and dirt. Allow both tanks to dry before reinstalling.
Wash and Check the Filters
Filters are very important. They keep dust and dirt out of the motor. And if filters get dirty, your machine loses power. It may also overheat. Check the filters regularly. Some filters can be washed. Others need to be replaced. Just go by your model levels. Do allow washable filters to air-dry completely before reinserting them. Do not return damp filters to the machine.
Inspect the Brushes and Nozzles
Brushes and nozzles do the heavy cleaning. They trap hair, threads, and dirt. Check them often. Remove any trapped debris. This allows the machine to clean more effectively. It also extends the life of the motor. If brushes appear worn, replace them. Dirty brushes are not effective. They can also ruin your carpets or floors.
Clean the Hoses and Pipes
Hoses and pipes can become clogged. This reduces suction power. It also strains the machine. Check hoses for clogs. You can rinse them in warm water. Make sure to let it fully dry before you use the machine again. If you hear noises other than the normal suction sound or feel that the suction is not pushing as strongly as usual, then a clogged hose could be what’s causing it.
Check for Leaks
Water leaks are a common issue. Inspect around the tanks and hoses. Check for cracks or loose connections. Finally, even a small leak can lead to big problems over time. They will harm the floor or motor. Repair leaks as soon as you see them.
Keep the Machine Body Clean
Clean the outside of the machine with a wet cloth. This removes dust and stains. Do not use strong chemicals. They can damage the plastic. It’s not going to work, and it won’t look good or feel good in use. It helps you spot issues earlier, too.
Store the Machine Properly
Good storage is included in good maintenance. Store the machine in a dry location. Don’t let water in the tanks turn into standing water. Do not coil the cord too tightly. This has the potential to harm the wire in the long run. Store hoses and tools neatly. This prevents bending and cracking.
Follow a Regular Maintenance Schedule
Don’t wait until there are issues. Make a simple schedule. Clean tanks every time you use them. Check filters every week. Inspect brushes every month. This helps to make it easy and fast. It also saves big repairs down the line.
Maintenance Tips for Commercial Use
Commercial machines work more often. That adds up as care. Check parts more frequently. If the machine is used often, clean filters and tanks at least once a day. Keep replacement parts such as filters and brushes on hand. This way, you will not have to deal with downtime or be late for work.
Final Thoughts
Caring for your Vax machine doesn’t have to be difficult. A little goes a long way, so it could be enough to take simple steps regularly. Clean the tanks. Check the filters. Inspect brushes and hoses. Store the machine properly.
Consider this your easy, practical Vax machine maintenance guide. With proper care, you will be able to enjoy your machine for years. It will clean better. It will work more smoothly. And saving you time and money in the long run.
With a Master’s in Architecture from the University of California, Berkeley, Mitchell Green has spent over two decades dedicated to the study and practical application of home fixture design. His career started in an architectural firm, providing him a strong foundation in the structural and aesthetic aspects of home interiors. Mitchell brought his comprehensive knowledge to our platform, where he has been an influential voice in our home fixtures and fittings section. Since 2018, he has been guiding our readers through the intricacies of selecting and installing fixtures, combining technical know-how with design flair. In his spare time, Mitchell is a keen photographer, capturing architectural details and design elements, an interest that complements his professional focus.
